fusion racing

The Ride HERO is a seatpost and handlebar tube clamp for mounting your quick-release GoPro camera on to tubes/frames ranging from 0.75" to 1.4" (1.9cm - 3.5cm) in diameter.

You can also clamp to chainstays, small roll bars, bolt-heads, windsurfing and kitesurfing booms/control bars, or anything else that is in the size range above.

Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

What's Included:
1 Handlebar/Seatpost Clamp
1 Three-way Adjustable Pivot Arm
Warranty: 1 Year

Roll bar/tube clamp for mounting your quick-release GoPro camera on to tubes/frames ranging from 1.4" to 2.5" (3.5cm - 6.35cm) in diameter.

Perfect for clamping your camera to the radiator cap (both metal and plastic caps) on karts.

You can also clamp to bike frames, bumper bars, ski/surfboard racks, or anything else that is in the size range above.

Comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

What's Included:
1 Roll Bar/Tube Clamp
1 Three-way Adjustable Pivot Arm (three piece assembly)
Warranty: One Year

Industrial strength suction cup for your quick-release HERO camera. This is the suction cup that comes with the Motorsports HERO and Motorsports HERO Wide cameras. Strong enough to pull dents out of a car door (unfortunately tested and proven by GoPro) or stay attached to an airplane at 200mph+, proven though not endorsed by GoPro per FAA rules.

Perfect if you own a Helmet HERO, Surf HERO, or Wide HERO camera and want to add a suction cup mount to your arsenal. Attaches to cars, motorcycles, snowmobiles, cockpits, you name it.

NOT RECOMMENDED for surfboards, snowboards or other high-impact sports. Only recommended for non-impact activities.

What's Included:
1 Suction Cup Mount
1 Rotational Joiner Arm
Warranty: 1 Year

Chest harness for your quick-release HERO camera. Makes it easy to capture immersive video and photo footage from, well...your chest. Perfect for skiing, mountain biking, motocross, paddle sports, or any activity where you want to get a "lower than the helmet" view of the action. See more of your arms, knees poles, and skis while skiing...or your arms and handlebars while biking or riding your motorcycle. Recommended as a more immersive way to film than on the helmet. 

One size fits all adjustability.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

What's Included:
1 Adjustable Chest Harness
1 Vertical Surface "J-Hook" Buckle
Warranty: 1 Year

Includes all of the mounting accessories from the Surf HERO camera, minus the waterhousing and camera. Perfect for mounting your Helmet HERO or other quick-release HERO camera on to a surfboard.

Tested and approved by pro surfers in macking Puerto, Northern California, and Hawaii, the Surf HERO is a revolutionary quick-release board-mountable camera.

The Surf HERO includes two, removable mounting options:
A stick-on baseplate that takes a couple of minutes to set up and go.
An FCS™ compatible plug mounting system that allows you to allen-screw your camera into the deck of your board when you install an FCS™ center fin plug into the deck of your board. Easily done by any ding repairer or shaper.

Both options allow the camera to be quickly attached and removed from your surfboard.

Compatible with all quick-release GoPro cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

What's Included:
1 High-Impact, 3M™ Adhesive Mounting Disc with Integrated Leash System
1 FCS™-Compatible Male Plug Mount for Attaching to FCS™ Center Fin Plug
1 Rubber Quick-Release Stopper Lock
Warranty: One Year

Camera not included

Head strap mount for your quick-release HERO camera.

One size fits all adjustability.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and Wide HERO cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

What's Included:
1 Adjustable Head Strap Mount
Warranty: 1 Year

Tripod mount for attaching your quick-release GoPro camera to a standard tripod.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.

What's Included:
1 Tripod Mount
Warranty: One Year

Vented helmet strap for your quick-release HERO camera. 

One size fits all adjustability.

Compatible with all GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. NOT compatible with the Digital HERO 5 Wrist Camera.

What's Included:
1 Adjustable Strap for Vented Helmets
Warranty: 1 Year

The Grab Bag is bag of add-on parts is for GoPro quick-release camera owners wanting more mounts.

If you want to expand your mounting options for you Motorsports HERO Wide, Motorsports HERO, Helmet HERO WIDE, Surf HERO, or Wide HERO camera...this bag will set you up. It includes 2 flat surface base plates, 2 curved base plates, a thumb knob and stainless steel hardware, 1 quick release buckle, and a vertical J mount for mounting your camera on a vertical wall surface like a car bumper, wall, back of helmet, or similar.

What's Included:
2 Flat, 3M™ Adhesive Mounts
2 Curved, 3M™ Adhesive Mounts
1 Horizontal Surface Quick-Release Buckle
1 Vertical Surface J-Hook Buckle
1 Thumb Knob with Nut and Bolt
Warranty: One Year